The Studio Technologies Model 5412 Audio Interface features 16 line-level analog inputs and 16 line-level analog outputs.
The Studio Technologies Model 5412 Audio Interface features 16 line-level analog inputs and 16 line-level analog outputs. It supports Dante audio-over-ethernet technology with AES67-2018 compatibility, including Dante Domain Manager support. The device includes three network interfaces: Dante primary, Dante secondary, and management, all utilizing gigabit ethernet. Analog inputs are electronically balanced, capacitor coupled, and designed for connection to balanced or unbalanced signal sources.
The interface has a 20 kohm impedance and nominal level of +4 dBu. Outputs are similarly balanced and capacitor coupled, intended for driving loads of 2 kilohms or greater. The unit includes various connectors such as 25-pin female d-subminiature, rj45 jacks, type a usb receptacle, and ac mains input. It also features a tone generator and a backlight display. Software updates are supported via usb flash drive for main mcu and main fpga firmware.
Power sources include ac mains and dc input with specified voltage ranges. The device operates within a temperature range of 32 to 122°F and is rackmountable at 1 ru.
- Model: 16 Line-Level Analog Inputs and 16 Line-Level Analog Outputs
- Network Audio Technology: Type: Dante Audio-Over-Ethernet AES67-2018 Support: Yes Dante Domain Manager (DDM) Support: Yes Ethernet Interface Configuration: Switched or Redundant Sample Rates: 44.1, 48, 88.2, and 96 kHz Bit Depth: Up to 24 Number of Dante Transmitter (Output) Channels: 16 Number of Dante Receiver (Input) Channels: 16 Number of Dante Flows: 32 Transmitter, 32 Receiver
- Network Interfaces: Quantity: 3 (Dante Primary, Dante Secondary, and Management) Type: 1000BASE-T Gigabit Ethernet (GigE) per IEEE 802.3ab (100 Mb/s Also Supported but Not Recommended for Optimal Performance; 10 Mb/s Not Supported) Ethernet Connection NIC Status LEDs: One Link and One Activity for Each Ethernet Interface
- Analog Inputs: Type: Electronically Balanced, Capacitor Coupled, Intended for Connection to Balanced (Differential) or Unbalanced Signal Sources Impedance: 20 kOhms Nominal Level: +4 dBu, Reference -20 dBFS, Adjustable ±20 dB in 0.1-dB Steps Maximum Level: +24 dBu, Results in Digital Output Level of 0 dBFS Dynamic Range: 120 dB, A-weighted Distortion (THD+N): <0.0004% (-108 dB), Ref 1 kHz, +23 dBu Input/-1 dBFS Output Frequency Response: ±0.2 dB, 14 Hz to 20 kHz
- Analog Outputs: Type: Electronically Balanced, Capacitor Coupled, Intended to Drive Balanced or Unbalanced Loads of 2 Kilohms or Greater Source Impedance: 200 Ohms Nominal Level: +4 dBu, Reference -20 dBFS, Adjustable ±20 dB in 0.1-dB Steps Maximum Level: +24 dBu Dynamic Range: >119 dB, A-Weighted Distortion (THD+N): <0.001% (-101 dB), Reference 1 kHz, -1 dBFS Input/+23 dBu Output Frequency Response: ±0.1 dB, 6 Hz to 20 kHz
Specifications
There are no reviews for this product.
No questions about this product.