Model:
ST-MA2
SKU:
ST-MA2
Availability:
In Stock
$136.33
Estimated price. Final price and availability are subject to confirmation. Contact our sales team for a current quote.
  0 reviews

The RDL ST-MA2 Mono Audio Amplifier with Muting is a 2W, 8-Ohm single-speaker amplifier designed for conferencing monitor amplification.

The RDL ST-MA2 Mono Audio Amplifier with Muting is a 2W, 8-Ohm single-speaker amplifier designed for conferencing monitor amplification. This device features an input impedance of 20 kOhms, balanced or unbalanced bridging, and an input level of -10 dBV minimum for 2 W RMS output. The output impedance is 8 Ohms, capable of driving 4 Ohm loads. It provides 1.75 W RMS continuous power with a maximum of 2 W RMS. The amplifier has a THD & Noise of less than 0.5%, a bandwidth of 45 Hz to 14 kHz, and a common mode rejection ratio greater than 60 dB (50 Hz to 120 Hz).

Residual noise is below -80 dB (below 2 W RMS), with a switching time under 50 µs. Mute attenuation exceeds 90 dB at 1 kHz, 85 dB between 300 Hz and 3 kHz, and 75 dB from 20 Hz to 20 kHz. Attenuation is selectable at 3 dB or 6 dB, with each setting individually adjustable via two independent inputs. The ambient operating environment ranges from 32 to 104°F / 0 to 40°C.

  • Input Impedance: 20 kOhms Balanced or Unbalanced Bridging
  • Input Level: -10 dBV Minimum for 2 W RMS Output
  • Output Impedance: 8 Ohms (Will Drive 4 Ohms Loads)
  • Output Power: 1.75 W RMS Continuous 2 W RMS Max.
  • THD & Noise: < 0.5%

Specifications

Ambient Operating Environment
32 to 104°F / 0 to 40°C
Bandwidth
45 Hz to 14 kHz
Box Dimensions (LxWxH)
4 x 2 x 1.9"
Dimensions
Not Specified by Manufacturer
Input Impedance
20 kOhms Balanced or Unbalanced Bridging
Output Impedance
8 Ohms (Will Drive 4 Ohms Loads)
Output Power
1.75 W RMS Continuous 2 W RMS Max.
Package Weight
0.185 lb
Power Requirements
Ground-Referenced 24 VDC @ 200 mA for Rated Output (220 mA @ 2 W RMS)
Switching Time
< 50 µs
THD & Noise
< 0.5%
Weight
Not Specified by Manufacturer
Attenuation
Selectable: 3 dB or 6 dB, Each Setting Individually Selectable Using Two Independent Inputs (Connect to Ground to Activate, 0.3 mA)
Common Mode Rejection Ratio
> 60 dB (50 Hz to 120 Hz)
Input Level
10 dBV Minimum for 2 W RMS Output
Residual Noise
< -80 dB (Below 2 W RMS)
Mute Attenuation
> 90 dB (1 kHz) > 85 dB (300 Hz to 3 kHz) > 75 dB (20 Hz to 20 kHz)
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.